David Harrison

Selected Professional Activities
NESTA National Invention Strategy Panel (“03)
DTI/EPSRC/DEFRA Sustainable Technology Initiative Panel (“01-“04)
EPSRC Sustainable Materials Panel (“04)
EPSRC/ AHRB “Designing for C21 Century” advisory group (“04)
Chair of EPSRC Speculative Engineering Panel (“04)
Waste Minimisation Faraday Advisory Panel (“04)
Member, EPSRC Public Engagement with Science panel (“05)
Advisory Panel, Science Museum, “Dead Ringers” exhibition (“06)
EPSRC/AHRC “Designing for C21 Century” panel (“06)
Innovative Electronics Manufacturing Research Centre, Management Executive and Funding Panel (“05-)
EPSRC/AHRC “Science and Heritage” appointment panel for National Research Programme Coordinator (“07)
Refereeing for EPSRC College, IEEE Sensors, and Electronics Letters
International Scientific Committee, 13th CIRP Conf. On Lifecycle Engineering (“06,”07)

Research grants and contracts
1989-92	Co-investigator , SERC grant, "New Techniques in the control of advanced production machinery" £120,000.
1992-94	Co-investigator , SERC grant, "A Process Model for Project Management". £150,000.
1992	Principal Investigator ,travel grant. SERC. £4,920.
1994	Academic Contact , EU, "Teleman Projects". 20,00 ECU.
1994	Co-investigator , EPSRC grant “A Framework for Simulation of Concurrent Engineering”, £200,000.
1995	Principal Investigator , “Novel Techniques in the Manufacture of Electronic Products”. Brunel University Enterprise Fund, £10,000.
1995-97	Principal Investigator , EPSRC grant, “A novel circuit fabrication process". £70,000.
1996-97	Co-invest., EPSRC "Eco design for disassembly". £35,000.
1997	Principal Investigator , Brunel Research Committee QR Grant, “Circuit fabrication using Conductive Lithographic Films”, £17,500.
1997-99	Principal Investigator , EPSRC grant, “Low Cost circuit fabrication using conductive lithographic films”. £210,000.
1998-99	Principal Investigator, EPSRC grant, “Vias and embedded resistor formation in low cost substrates”. £10,000.
1998-00	Principal Investigator, EPSRC grant, “An initial investigation into low cost assembly and packaging of polymer light emitting displays". £86,000.
1998-00	Principal Investigator, EPSRC grant “Frameworks for the Management of Step-Change Environmental Design”. £120,000.
1998-01	Co Investigator, EPSRC grant, “Lithographic construction of multi layer devices and circuits using powder filled inks”. £100,000
1998-00	Co Investigator, EPSRC grant “Design principles for active disassembly”. £85,000.
2000-04	Academic Contact , EU Fifth Framework grant, "Active Disassembly with Smart Materials" (PI for last year of contract ). £1.6 million
2001-02	Principal Investigator, EPSRC grant, "Lithographic printing of sensor structures". £60,000
2001-04	Co Investigator, EPSRC, "Prototyping Futures Research Institute". £75,000
2002-03	Principal Investigator, Nokia , “Printed Circuits”. £20,000
2002-03	P. Inv., Anson Fund, “Designing out Medical Error”. £14,000
2002-03	P. Inv., Prime Faraday/DTI, “Printed Vias for Circuits”. £5000
2003-05	C.Inv, EPSRC, “Thermoelectric structures”. £120,000
2004-09	C.Inv, EPSRC, Electronics Manufacturing Research Centre, £5M
2005-09	P.Inv. EPSRC IEMRC Travel grant, £10,000
2005-06	C.Inv, EPSRC, IEMRC, “Thermocouple fabrication”, £30,000
2005-06	C.Inv, EPSRC, IEMRC, “Printed Batteries”, £52,000
2005-08	P.Inv., EU STREP “Paperworks”, £140,000
2005	P.Inv., DTI “Active Disassembly”, (offered by DTI, but withdrawn following failure of industrialists to sign contract). £120,000
2007	P.Inv. Design for Disassembly (DTI Feasibility study, follows on from above). £4,000
2006-08	P.Inv., EPSRC, “DNA traps on Cartridges”. £134,000
2006-07	C.Inv., EPSRC, IEMRC, “Microcontact Printing”, £52,000
2006-08	C Inv, EPSRC, IEMRC, “Integrated lithographically printed electronics”. £100,000
2006-07	C Inv. EPSRC, IEMRC, “Vacuum deposition and laser patterning of thin films”. £30,000
2007-10	EPSRC DTA from 3DMintegration Grand Challenge project, £45,000

HEIF and Commerical Funding
2003	Universities Challenge Fund for company start up £150,000
2004	DTI SMART AWARD £75,000
2004	HEIF2, Design and Manufacture network £60,000
2005	HEIF2, Design and Manufacture network £60,000
2006	HEIF3 Display Prototypes £54,000

Research History and Career
Employment
1980-82	BBC TV	Engineer
1984-89	BBC Education	Researcher and Director
1990-94	University of Portsmouth	Senior Lecturer
1994-2002	Brunel University	Lecturer, Senior Lecturer, Reader
2002-	Brunel University	Chair in Design
2005, 2008	Brunel University	Subject Leader, Design

Publications
http://bura.brunel.ac.uk/items-by-author?author=Harrison,+D+J

Books
Harrison, D. & Wallace, S. (1985). Robots. MacDonald Education.
Harrison, D. & Jaques, M. (1996). Experiments in Virtual Reality. Butterworth-Heinemann. (Butterworth-Heinemann : www.bh.com)
Ramsey, B. & Harrison, D. (2000). Handbook of Conductive Lithographic Films. ISBN: 0-9538356-0-X

Part Books
Harrison, D., Billingsley, J. & Naghdy, F. (1985). Application of Rule-Based Methods to Inspection & Quality Control in a Manufacturing Process. Chapter 8, Robots and Automated Manufacture. pp42-53. pub. Peter Peregrinus.
Harrison, D. & Norton, M. (1993). Peer Review and Options for Improvement, Annex B in Setting Priorities for the Science Base. A Parliamentary Office of Science & Technology Report. ppB1 - B6.
Harrison, D. & Norton, M., (1993). The Use and Limitations of Performance Indicators, Annex C in Setting Priorities for the Science Base. A Parliamentary Office of Science & Technology Report. pp C1 - C11.
Harrison, D., Jaques, M. & Strickland, P. (1993).Design by Manufacturing Simulation Using a Glove Input. Chapter 6, Virtual Reality in Engineering. pp91 -103. IEE Computing Series 20. IEE Press.
Harrison, D. Chalkley, A & Billett, E (2000) The Rebound Effect, in Designing Eco Solutions, (Birkland, J. ed.), Earthscan , Nov. 2000.
Harrison, D. (2000) Design for Sustainability is a Reality, in Exploring Design and Innovation, (Tabor, E. et al, eds.), pub. Brunel University, ISBN 0-9538356-2-6 . p5.
Hussein, H., Harrison, D.(2004) Investigation into the use of engineering polymers as actuators to produce “automatic disassembly” of electronic products, in Design and Manufacture for Sustainable Development, pp36-49.
Kazi, T. A., Stanton, N. A., Young, M. S., & Harrison, D. A. (2005). Assessing drivers’ level of trust in Adaptive-Cruise-Control and their conceptual models of the system: Implications for system design. In L. Dorn (Ed.),Driver Behaviour and Training: Volume 2 (pp.132-142). Aldershot: Ashgate.

Journal Papers
Billingsley, J., Naghdy, F. & Harrison, D. (1983). The Craftsman Robot, IEE Journal of Electronics and Power. November pp 805-808.
Naghdy, F., Billingsley, J. & Harrison, D .(1984). Simulation of Human Judgement in a Robot-Based Adjustment System. Robotica, No.2 1984, pp 209-214.
Naghdy, F., Billingsley, J. & Harrison, D. (1985). Craftsman computer integrated manufacture., Journal of Quality Assurance, 1 1(2) 1985, pp 43-46. http://hdl.handle.net/2438/1848
Naghdy, F., Billingsley, J. & Harrison, D. (1985). Hierachical Control of a Robot Based Adjustment and Testing System,, Journal of Institute of Measurement and Control, 18(4) 1985, pp 137-140.
Jaques, M., Billingsley, J. & Harrison, D. (1991). Generative Feature-Based Design-by-Constraints Computer Aided Engineering Journal, Vol 8, No.6 Dec. 1991, pp 261-268. (IEEE) http://hdl.handle.net/2438/1849
Harrison, D. & Meng, T. (1995 .) A Conceptual Quality Performance Model, Quality World, Technical Journal of the Institute of Quality Assurance., March 1995, pp44 - 47.
Evans, P., Ramsey, B., Harrison, D. & Shepherd, P. (1997). Lithographic technology for microwave integrated circuits. I.E.E. Electronics Letters. Vol.33, No.6, March 1997. p483.http://hdl.handle.net/2438/1803
Ramsey, B., Evans, P. & Harrison, D. (1997). A Novel Circuit Fabrication Technique Using Offset Lithography, Journal of Electronics Manufacturing. Vol. 7 No.1 pp 63 - 67.
Chiodo , J., Billet, E. & Harrison, D. (1998). Active Disassembly. The Journal of Sustainable Product Design. Issue 7, October 1998. pp26 - 36.
Evans, P., Ramsey, B. & Harrison, D. (1999) Printed analogue filter structures. IEE Electronics Letters, Vol. 35 No.4 Feb. 1999, p.306.http://hdl.handle.net/2438/1805
Walton, A., Stevenson J., Fallon, M., Evans, P., Ramsey, B. & Harrison, D.(1999) Characterisation of Offset Lithographic Films Using Microelectronic Test Structures. IEICE Transactions on Electronics. (Japan), E- 82 – C, No 4, pp 576 – 581, April 1999.
Evans, P., Ramsey, B ., Harrey, P. & Harrison, D.(1999) R.F. Circulator Structures Via Offset Lithography I.E.E. Electronics Letters, Vol 35 No. 19, September 1999, p1634. http://hdl.handle.net/2438/1939
Jones E., & Harrison D. (2000) ‘Investigating the use of TRIZ in Eco-innovation’ The TRIZ Journal , The TRIZ Institute, [http://www.triz-journal.com] September Issue 2000 (*) http://hdl.handle.net/2438/2389
Stanton, N., Harrison, D., Taylor- Burge, K., Porter, L., (2000) Sorting the Wheat From the Chaff, A study on the detection of alarms. International Journal of Cognition, Technology and Work. http://hdl.handle.net/2438/1624
Lochun D., Ramsey B, Harrison D. (2000) An initial investigation into the low cost manufacture of diffracting objects.Journal of Optics A: Pure and Applied Optics. 2 (2000) L13-L15 http://hdl.handle.net/2438/2384
Elliner, G., Gilbert ,J., Harrey, P.& Harrison, D. (2000). Vias in conductive lithographic films, I.Mech E, Journal of Engineering Manufacture, Proc Inst. Mech Engrs Vol 214 Part B. pp837-839.
Leyland, N., Evans, J., & Harrison, D., (2000) "The microstructure of lithographically printed cerami c films", Proc. Roy. Micros. Soc. Suppl. Vol 31 (2000) No.1 p.1
Harrey, P, Evans, P., Ramsey, B. & Harrison, D. (2000) Interdigitated Capacitors by Offset Lithography , Journal of Electronics Manufacturing. Vol. 10, No. 1 (2000) 69 –77.
Chiodo, J..D., Harrison, D., Billett E. (2001) “An initial investigation into active disassembly using shape memory polymers”. I.Mech E Journal of Engineering Manufacture, Proc. Instn. Mech. Engrs Vol 215 Part B, p733-741.
Harrison, D., Lochun, D., (2001) Manufacturing flexible light emitting polymer displays with conductive lithographic film technology, Journal of Smart Materials and Structures (I.O.P.), 10, (2001), 650-656. http://hdl.handle.net/2438/2385
Jones E., Stanton, N., & Harrison D. (2001) ‘Do structured methods help Eco-innovation: an evaluation of the Product Ideas Tree Diagram' . Design Studies, Elsevier Science, Kidlington, Oxford, U.K. Volume 22, Issue 6, pp 519-542. http://hdl.handle.net/2438/2318
Jones, E., Mann, D,, Harrison, D., Stanton, N., (2001) An Eco-innovation Case Study of domestic dishwashing through the application of TRIZ tools.‚ Journal of Creativity and Innovation Management, Blackwell Publishers, Oxford, U.K. Volume 10, Issue 1, pp 3-14.
Jones, E., Harrison, D., McLaren, J.. (2001) Managing Creative Eco-innovation: Structuring outputs from Eco-innovation projects. , Journal of Sustainable Product Design, Kluwer Academic publishers, Dordrecht, The Netherlands , Volume 1, Issue 1, pp 27-39. http://hdl.handle.net/2438/2317
Leyland, N., Evans,J., & Harrison, D., (2001) Flexible Ceramic Lithographic Inks, Br. Ceram. Trans. 2001 Vol.100 No.6.
Evans, P, Ramsey,B, Harrison, D, Harrey, P, (2001) Lithographic Film Circuits – A Review, Circuit World, Journal of the Printed Circuit Industry Federation, Vol 27, No. 3 April 2001.
Harrey, P, Evans, P & Harrison, D. (2002) Interdigitated Capacitors for Conductive Lithographic Film circuits , IEEE Transactions on Electronic Packaging and Manufacturing. Vol 24, No. 4. October 2002, pp333-338. http://hdl.handle.net/2438/1766
Evans, P, Harrison, D, Harrey, P, (2002) Third Generation Lithographic Film Process. Circuit World, Journal of the Printed Circuit Industry Federation, Vol 28, No 2, 2002, pp 9-11.
Chalkey, A, Harrison, D, Billett, E, (2002) Evaluating the Respending Rebound Effect, Journal of Sustainable Product Design, Kluwer Academic publishers, Dordrecht, The Netherlands. 2002.
Leyland,N., Evans,J., & Harrison, D., (2002), Lithographic Printing of Ceramics, J. European Ceram. Soc. 22. 2002. 1-13
Harrey, P., Evans, P., Ramsey,B., Harrison, D., (2002), Capacitive type humidity sensors fabricated using the offset lithographic printing process. Sensors and Actuators B6361 (2002) 1-7.
Chiodo,J., Jones, N., Billett, E., Harrison, D., (2002), Shape Memory Actuators for Active Disassembly, Journal of Materials and Design, Volume 23, Issue 5, Summer 2002.
Leyland,N., Evans,J., & Harrison, D., (2002), Lithographic Printing of Force Sensitive Resistors Journal of Materials Science: Materials in Electronics 13 .2002. 387-390
Davis, G., Bulson, H., Harrison, D. and Billett, E. (2002) The Performance of Degradable Polymers Within Wastes Management. Wastes Management and the Environment. WIT Press. Pp287-296. 2002. ISBN 1-85312-919-4
Davis, G., Bulson, H., Harrison, D. and Billett, E. (2003) The performance of degradable polymer bags. Macromolecular symposia, 2003,197,265-276 (Wiley-VCH) http://hdl.handle.net/2438/1940
Chalkey, A., , Billett, E., Harrison, D., Simpson,G. (2003) Development of a Method for Calculating the Environmentally Optimum Lifespan of Electrical Household Products Proc. Instn Mech Engrs Vol 217 Part B J. Engineering Manufacture No. 11 p1521-1531 (Submitted 2003)
Davis, G., Read, A., Bulson, H., Harrison, D. and Billett, E. (2004) Open Windrow Composting of Polymers: An Investigation Into The Rate of Degradation of Polyethylene. Resource Conservation and Recycling, 40 (2004)343-357. (Elsevier). (Submitted Jan. 2003) http://hdl.handle.net/2438/2314
Davis, G., Read, A., Bulson, H., Sharpe,N., Harrison, D. and Billett, E. (2004) A Comparative Study of Wheeled Bins versus Degradable Polymer Sacks for the Kerbside Collection of Organic Wastes. Chartered Institute of Waste Management Scientific and Technical Review, May 2004. pp18-30. (Submitted 2003)
Jones, N., Harrison, D., Hussein, H., Billett, E., Chiodo, J., (2004) Electrically self powered active disassembly, Proc. Instn Mech Engrs Vol 218 Part B: J. Engineering Manufacture ISSN 0954-4054. p689-697. (submitted Jan 2003).
Petherbridge , K., Evans, P., Harrison, D., (2004) The origins and evolution of the PCB: a review. Circuit World, The Journal of the Institute of Circuit Technology, Emerald, Vol 31, No.1 Sept 2004.
Duby, S., Ramsey, B., Harrison, D. (2005), Printed thick-film thermocouple sensors, Electronics Letters, March 2005 vol 41, No.6, pp312-314. http://hdl.handle.net/2438/1941
Hay, G., Evans, P., Harrison, D. et al (2005) Characterisation of lithographically printed resistive strain gauges. IEEE Sensors Journal, Vol 5, No.5 October 2005. pp864-871 http://hdl.handle.net/2438/1760
Busayawan, A. Holland, R., Harrison, D. (2005) The Future Design Direction of Smart Clothing Development, Journal of the Textile Institute, Volume 96(3), pp 38-51.
Frey, S, Harrison, D., Billett, E., (2006) Ecological Footprint Analysis Applied to Mobile Phones. Journal of Industrial Ecology, MIT Press, Vol. 10, No 1-2: 185-197.
Pettersson,J., Ramsey, B., Harrison, D. (2006) A review of developments in electrodes for regenerative polymer electrolyte fuel cells Journal of Power Sources Vol 157, Issue 1, P.28-34 http://hdl.handle.net/2438/2175
Lane, R., Stanton,N., Harrison, D. (2006) Hierachical Task Analysis of Drug Administration, Applied Ergonomics 37 (Sept. 2006) 669-679.
Withnail,R., Silver,J., Fern,G., Marsh.P., Ireland,T., Evans, P., Southee, D., Hay,G., Harrison, D., Breen, K. (2006), Low cost flexible EL Displays with a novel architecture printed by offset lithography, SID digest, 37 vol 2,1491 ( June 2006) http://hdl.handle.net/2438/2096
Busayawan,A. Holland, R., Harrison, D. (2006) Optimizing Multidisciplinary Contributions for the Smart Clothing Development Process, The Design Journal, Volume 9, Issue 1 2006
Pettersson, J. Ramsey, B. Harrison, D.J. (2006) Fabrication of bifunctional membrane electrode assemblies for unitised regenerative polymer electrolyte fuel cells. Electronics Letters, December 7 2006 Volume: 42, Issue 25 page(s): 1444-1446 http://hdl.handle.net/2438/1942
Duby,S., Ramsey,B., Harrison,D. (2006) Low cost pattering of thin film, Proc I.Mech Part B, Journal of Engineering Manufacture, Volume 220, Number 9/ 2006 pp1555-1558. http://hdl.handle.net/2438/2160
Jones E., Harrison, D., Stanton,N.(2007) New tools for the early stages of Eco-innovation:an evaluation of simplified TRIZ tools, Journal of Design Research special issue.(In press)
Kazi, T. A., Stanton, N. A., Young, M. S., Walker, G. H., & Harrison, D. (2007) An investigation of drivers’ performance with intelligent vehicle systems: Drivers’ level of trust in automatic cruise control and their conceptual models of the system. International Journal of Vehicle Design. (In press)
G.Hay, D.Southee, P.Evans, D.Harrison, (2007) Examination of Silver Graphite Lithographically Printed Resistive Strain Sensors. Sensors and Actuators A: Physical Vol 135, Issue 2, April 2007, pp534-546 http://hdl.handle.net/2438/2413
Hay,G. Southee,D., Harrison, D. (2007) Lithographically Printed Voltaic Cells, invited paper for “Circuit World”, the Journal of the Institute of Circuit Technology. Vol 33, Number 3, 2007 http://hdl.handle.net/2438/1332

Papers Accepted for Publication
B.Ramsey,D.Harrison,D.Southee, Characterisation of lithographic printing of conductive films, The Graphic Arts Journal”, accepted.

Conferences
Naghdy, F., Billingsley, J. & Harrison, D. (1983). The Craftsman Robot.Digest, IEE Colloquium on robots for inspection and adjustment. IEE Savoy Place, November 1983, pp 2.1-2.3.
Billingsley, J., Naghdy, F. & Harrison, D. (1983). The Craftsman Robot. Digest, IEE meeting on Robotics Research in the UK. Savoy Place, December 1983.
Harrison, D., Billingsley J. & Naghdy, F. (1984). Force Sensing with the Unimation Puma. Digest of IEE Colloquium: Robotics - Tactile Sensing and Force Feedback, London October 1984.
Tewkesbury, G., Harrison, D. & Sanders, D. (1992). A Transputer-Based Laser Scanning System Proceedings of IEEE Conference, Singapore, Feb 1992.
Harrison, D. & Sanders, D. (1992). Imagineering: Promoting Creativity in Engineering Education. Proceedings of World Conference on Engineering Education, Portsmouth, September 1992. pp45 - 49.
Sanders, D. & Harrison, D. (1992). The requirement for systems engineers. Proceedings of World Conference on Engineering Education, Portsmouth, September 1992.pp343 - 348.
Harrison, D. & Jaques, M. (1994). Using Gestures to Interface with a 'Virtual Manufacturing' package. Proceedings of 'Interface to Real and Virtual Worlds'. Montpellier, February 1994. pp231 - 240.
Loschenkohl, S. & Harrison, D.(1994). Collaborating Robots in an Unknown Environment. Proceedings of the Teleman Student Research Congress, June 1994. pp 177-182.
Hicks, D. & Harrison, D. (1994). Control of Collaborating Robots. Proceedings of the Teleman Student Research Congress, June 1994. pp 183-188.
Wallace, A. & Harrison, D. (1994). Sharing World Models in Cooperating Robot Teams.Proceedings of the Teleman Student Research Congress, June 1994. pp 189-196.
Jones, P. & Harrison, D. (1994). Using Virtual Reality to Control a Mobile Robot. Proceedings of the Teleman Student Research Congress, June 1994. pp 197-202.
Farrington, T. & Harrison, D. (1994). Biomechatronics - A Review.Proceedings of Mechatronics and Vision Conference, University of Southern Queensland, September 1994.
Jaques, M., Harrison, D. & Strickland, P. (1994). An Automated Non-Destructive Materials Testing System. Proceedings of the European Robotics and Intelligent Systems Conference, Aug. 1994, Volume1, pp 591-597.
Robinson, D., Mazharsolook, E. & Harrison D. (1994). Software-based Intelligent Support for Manufacturing Quality Control. Proceedings of the European Robotics and Intelligent Systems Conference, Aug. 1994, Volume 1, pp 561-567.
Harrison, D., Billett, E. & Billingsley, J. (1995). Novel Circuit Fabrication Techniques for Reduced Environmental Impact. Proceedings of IEE/IEEE International Conference on Clean Electronics. Edinburgh, Oct. 1995, pp 174-176.
Evans ,P., Ramsey, B., Harrison, D. & Shepherd, P. (1996). Assessment of Conductive Lithographic Films for Microwave Applications. Automated R.F. and Microwave Measurement Society Conference. 31st October - 1st November 1996. Limpley Stoke, Bath, UK. (Prize Paper).
Chiodo J., Harrison D., Anson, A. & Billett, E. (1997). Eco-design for Active Disassembly, Proceedings of the Shape Memory and Super Elastic Technologies Conference, California, March 1997. pp269 -274.
Ramsey, B., Simpson, P. & Harrison , D. (1997). Assessment of the Environmental Impact of Conductive Lithographic Films. Engineering Management Conference, Loughborough, August 1997. pp397 - 406.
Evans ,P., Ramsey, B., Harrison, D. & Shepherd, P. (1997). Conductive Lithographic Films - Novel Material Application for Electronics. Technology Foresight Workshop - Molecules, Materials and Markets. Royal Society of Chemistry. 7th January 1997. Bristol, UK.
Evans, P., Ramsey, B., Harrison, D. & Shepherd, P. (1997). Further Developments of Microwave CLFs. Automated R.F. and Microwave Measurement Society Conference. 7th - 8th April 1997. Malvern, UK.
Ramsey, B., Evans, P. & Harrison, D. (1997). Conductive Lithographic Films. IEEE International Symposium on Electronics and the Environment. 5th - 7th May 1997. San Francisco, California. p252-257.
Evans, P., Ramsey, B. & Harrison, D. (1997). A Comparison of the Characteristics of Conductive Lithographic Films and Screen Printed Circuits. 11th Annual European Passive Components Conference (CARTS-Europe 97). 14th - 16th October 1997. Prague, Czech Republic. p24-28.
Walton, A., Stevenson, J., Fallon, M., Evans, P., Ramsey ,B. & Harrison, D. (1998) Test Structures to Characterise a Novel Circuit Fabrication Technique That Uses Offset Lithography. IEEE International Conference on Microelectronic Test Structures. 23rd - 26th March 1998. Kanazawa, Japan.
McClaren, J., Cowell, S., Jones, E., & Harrison , D. (1998). Life Cycle modelling of consumer electronic products with convergent functionality. 6th LCA Case Studies Symposium , Society of Environmental Toxicology and Chemistry, Brussels, Dec. 1998. pp61 -67.
Chiodo ,J., Billett, E., Harrison, D. & Wright , L.(1999). Eco Design 1999, 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing 1st Feb. 1999, Tokyo, Japan, Active Disassembly using Shape Memory Polymers. p590-597.
McLaren J., Harrison D., and Jones E., (1999) 'Forecasting Future Sustainable Telecommunication Services– a Life Cycle Approach' Proceedings of the CIRP Life Cycle Engineering Conference, Queens University, Ontario. Canada 21-23 June 1999.
Harrey ,P., Ramsey, B. Evans, P. & Harrison , D.(1999). Eco Design 1999, 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing 1st Feb. 1999, Tokyo, Japan, A novel manufacturing process for capacitors . p 842-848.
Chiodo , J., Billett , E. & Harrison, D and Harry, P. (1998). IEEE Conference on Clean Electronics, Illinois, USA, May 1998, Investigations of Generic self disassembly using shape memory alloys. p82-87..
Lochun, D., Kilziraki ,M., Jarrett, E., Ramsey, B., Samuel ,I. & Harrison ,D. (1999) Post Processing of Conductive Lithographic Films for Multilayer Device Fabrication International Electronics Manufacturing Technology Symposium (IEMT-99) Oct. 18-20 1999. Austin Texas USA. p287-294.
Evans, P., Ramsey,B., Harrey,P., Harrison, D. (1999) Component Attachment in Conductive Lithographic Films International Electronics Manufacturing Technology Symposium (IEMT-99) Oct. 18-20 1999. Austin Texas USA. p282-286.
Gilbert ,J., Elliner, G., Harrey, P., Harrison, D et al. .(1999). Via and embedded resistor production in low cost lithographically printed substrates. Proc 49th IEEE Electronic Components and Technology Conference. (ECTC) San Diego USA June 1999, p.212-218.
Harrey, P., Evans, P., Ramsey, B., Harrison, D. (1999) Structures for Lithographic Component Networks 13th European Passive Components Conference, 18th – 22nd October , Lisbon, Portugal. (Seminar notes, p7-8).
Chiodo , J., Billett, E. & Harrison, D.(1999) Active Disassembly using Smart Materials - Introductory Materials Overview: The Fourth International Conference on Ecomaterials, Gifu, Japan, 8 -10th Nov. 1999.
Chiodo , J., Billett , E. & Harrison, D.(1999), ADSM: Step Change to EIR using Smart Material, Asian Design Conference', Niigata-Ken, Japan 30 Oct 1999.
Chiodo , J., Billett , E. & Harrison, D., Perkins, M and Anson,A.W, (1999). 'Shape Memory Allot Actuators for ADSM of Consumer Electronic Products': 38th Gateway Annual Conference of Metallurgists' Quebec, Canada, 22-26th August, 1999. p425-439. ISBN 0-919086-93-4.
Jones E., Harrison D. & J. McLaren. (1999). ‘The product ideas tree: a tool for mapping creativity in ecodesign’ in Proceedings of IDATER 99, Loughborough University, UK . 23-25 August 1999 p213-223.
Kilitziraki M., Lochun D., Harrison D., and Samuel I.D.W. (1999) Lithographic Printing of Contacts for Polymer Light-Emitting Diodes Poster presentation at European Conference on Molecular Electronics, Linkoping, Sweden, September 1999.
Ramsey, B. & Harrison, D. (2000) Development of paper membrane switches for fully featured computer keyboards, Proceedings of the IEEE International Symposium on Electronics and the Environment. IEEE San Francisco, CA. 8-10 May. p. 27-32.
Chiodo J.D., McLaren J., Billett E., & Harrison D. (2000) ‘Isolating LCDs at end-of-life using active disassembly technology: a feasibility study’ Proceedings of the IEEE International Symposium on Electronics and the Environment. IEEE San Francisco, CA. 8-10 May. p318-323.
Frey, S, Harrison, D., Billett, E. (2000) "Integrated Product Policy and Ecological Footprint of Electronic Products". IEEE Symposium on Electronics and the Environment, San Francisco, May 2000. p.130-135.
Frey, S, Harrison, D., Billett, E.,(2000) "Environmental Assessment of Electronic Products using LCA and Ecological footprint", proceedings of Electronics Goes Green, Berlin, Sept. 2000. p253-258.
Davis, G., Harrison, D., Billett, E., and Warner, H. (2000) The Possible Use of Selected Waste Paper Grades as a Valuable Energy Resource in the Heating of Schools. Proceedings of the Engineering Doctorate (EngD) in Environmental Technology Annual Conference 2000. Brunel University, UK. Pp180-189. ISBN 185 237 2281
Jones E., & Harrison D. (2000) ‘TRIZ tools for use in Eco-innovation’ in Proceedings of TRIZCON2000, Altschuller Institute for TRIZ studies, Nashua, NH . 30 April-2 May 2000
Jones E., Harrison, D., Stanton, N. (2001) The application of TRIZ tools in an Eco-Innovation Process‚ in proceedings of: World Conference TRIZ Future 2001, Bath, UK, 7-9 November 2001
Chalkley, A, Harrison, D, Billett , E . (2001) A Review of Product Lifetime Optimization as an Environmental Tool, International Conference on Engineering Design, ICED 01, C586/513, p693- 699.
Szczesniak, J Harrison D., Billett, E. (2001) Intelligent Software Agent For Electronic Product Supply Chain Prep 2001 (9-11 April; Keele, UK), Third Conference on Postgraduate Research in Electronics, Photonics, Communication and Software; Proceedings of Posters p.101
Szczesniak, J , Harrison D. et al. (2001) Software Agents- A Tool For Environmental Supply Chain Optimisation LCM ( 27-29 August, Copenhagen) 1st International Conference on Life Cycle Management; Proceedings (Poster 3.11) pp. 349- 351
Frey, S, Harrison, D. , Billett, E, (2001) Environmental Assessment of a Mobile Phone using Ecological Footprint Analysis. Nokia Research Conference, Helsinki, 8 November 2001.
Frey, S, Harrison, D. , Billett, E, (2001) Environmental Assessment of a Mobile Phone using Ecological Footprint Analysis. International Society of Industrial Ecology conference , The Netherlands, 13 November, 2001
Harrey, P., Harrison, D., Ramsey, B., Evans, P. (2002) Low Cost Humidity Sensors Manufactured by Offset Lithography, 4th Int Symposium on Humidity and Moisture, Taiwan, Sept 2002.
Harrey, P., Harrison, D., Ramsey, B., Evans, P., Hay, G. (2002) Characterisation of Printed Humidity Sensors. Eurosensors 2002.
Hussein, H., Chiodo, J, Harrison, D., Billett, E. (2002) Design Principles for Active Disassembly, Recycling 2002, Geneva, March 2002.
Hussein, H., Harrison, D., Billett, E. (2002) Cost Effective Solutions to Take Back Legislation Design Issues, Design 2002, Dubrovnik.
Hussein, H., Harrison, D., Billett, E. (2002) Active Disassembly using Engineering Polymers, International Recycling Conference, Davos, Feb 2002 (Poster).
Davis, G., Harrison, D., Billett, E., and Bulson, H. (2002) The Performance of Degradable Polymer Bags. Integrated Waste Management and Pollution Control: Research, Policy and Practice. Waste 2002 Conference, Stratford. UK. Pp411-420. September 2002. ISBN 0-9539301-1-4
Davis, G, Bulson, H., Harrison, D. and Billett, E. (2002) The Performance of Degradable Polymers within Wastes Management. The 6th World Multiconference on Systemics, Cybernetics and Informatics, Orlando. International Institute of Informatics and Systemics. Volume XVIII. Pp430-435. July 14th-16th July 2002. ISBN 980-07-8150-1
Davis, G., Bulson, H., Harrison, D., and Billett, E. (2003) Biodegradable Polymers in Wastes Management. Proceedings of the Engineering Doctorate (EngD) in Environmental Technology Annual Conference 2002. Surrey University, UK. Pp255-264. ISBN 1852 372 397
Davis, G., Bulson, H., Harrison, D. and Billett, E. (2003) Open Windrow Composting of Degradable Polymers. Conference Proceedings of the Eighteenth International Conference on Solid Waste Technology and Management, Philadelphia, 23rd-26th March 2003. ISSN 1091 8043
Evans,P., Hay,G., Duby, S., Ramsey,B., Harrison,D., (2004). Lithographically Printed Sensors, PIRA Printed Electronics Conference, Jan.2004. Invited paper.
Evans,P., Hay,G., Southee.D, Harrison,D., (2004). Printed strain gauges for packaging, PIRA Diagnostic Packaging Conference, July.2004. Invited paper.
Hussein,H. Harrison,D. (2004) Automatic Disassembly of products using Engineering Polymers, Sustainable Design and Manufacturing Conference , Loughborough University, Sept 2004.
Hussein, H. Harrison, D. et al (2004) A Review of the Framework V ADSM project, Electronics Goes Green, Berlin, October 2004
Na-Kyung, K, Holland,R. Harrison, D. , Shakleton, J.(2005) An Integrated Approach based on Product Oriented Environmental Management System. Innovation by Lifecycle Management LCM 2005, Barcelona. (ISBN 84-609-6564-3)
Kazi, T. A., Stanton, N. A., Young, M. S., & Harrison, D. A. (2005). Assessing drivers’ level of trust in Adaptive Cruise Control and their conceptual models of the system: implications for system design. In L. Dorn (Ed.), Driver Behaviour and Training Volume 2 (Proceedings of the Second International Conference on Driver Behaviour and Training, Edinburgh, 15-17 November 2005). Aldershot: Ashgate.
Southee,D., Hay G., Evans, P. Harrison, D. (2006) “Development and characterisation of lithographically printed voltaic cells” ESTC 2006. Dresden, Germany. (Invited Paper)
Evans, P., Southee,D., Hay G., . Harrison, D, Withnall,R., Silver, J. et al.(2006) ”Low cost Flexible Electroluminescent displays with a novel architecture printed via offset lithography” Society for Information Display Conference (SID 2006) San Francisco, USA.
Evans, P., Southee,D., Hay G., . Harrison, D, Withnall,R., Silver, J. et al. (2006) “Fabrication of Miniaturised Electrode circuitry by conductive film printing for novel electroluminescent displays” 2006 Conference on the Science and Technology of Emissive Displays and Lighting, Jeju, Korea.
Silver, J. et al. , Evans, P., Southee, D., Hay G., . Harrison, D,( 2007) “The Fabrication of Miniaturised Electrode circuitry by Offset Lithographic Printing for Novel Electroluminescent Displays” Asia Display 2007, Shanghai.
Southee,D., Hay G., Evans, P. Harrison, D., (2007) “Printed Interconnects and Batteries”, RAPRA Polymers in Electronics Conference, 2007, Munich, Germany (Invited Paper)

Invited Presentations
Harrison, D. (1992) The Role of the Parliamentary Office of Science and Technology Invited seminar given at the Science Policy Research Unit, Sussex University, April 1992.
Harrison, D. (1997) Joint ITIC /EPSRC Electronic Product Design and Manufacture Meeting, Invited Speaker, Progress in Conductive Lithographic Films, Cardiff University, Nov. 1997.
Harrison, D., (1999) Lithographic Films, Joint Printed Circuit Industry Federation / EPSRC EMERNET meeting, Brunel University, November 1999.
Harrison, D, (2000) Innovation Spurred by Design, UK Design Forum, Rutherford Appleton Laboratory, April 2000.
Harrison, D, (2000) Conductive Lithographic Films, National Physical Laboratory , May 2000.
Harrison, D, (2000) Active Disassembly, On Gallery Demonstrations, Welcome Wing, Science Museum, London. July 2000.
Harrison, D, (2000) Speculative Innovation: Primed by Research Funding, Launch Conference EPSRC INTELLECT - Integrated Electronic Technologies Manufacturing Initiative 11 December 2000, Rutherford Appleton Laboratory.
Harrison, D, (2001) Conductive Lithographic Films, Printed Circuit Industry Federation Annual Conference, May 2001, Berkshire, UK.
Harrison, D, Ramsey, B, Evans, P, Harrey, P, (2001), Printed Electronics as an Enabling Technology, Italia Telecom Conference, Aqulia, August 2001.
Harrison,D (2002) Lithographically Printed Electronics, EPSRC/DTI Workshop on Printing Electronic Materials , Grasmere, September 2002
Harrison, D (2005) Active disassembly of electronic products, Electronics Yorkshire, Sustainable Electronics Workshop, March 2005.
Harrison, D., Hay, G. Southee, D. (2006) Lithographic printing of electronics, Institute of Circuit Technology Annual Symposium, National Physical Laboratory, July 2006.

Other Educational Output
Contributions to 25 hours of broadcast TV programmes on Information Technology and Computers
Interactive Videodisc, Robotics, written for the BBC Interactive Video Unit and the D.T.I., 1989.
Active Disassembly display, selected for display at the opening of the Welcome Wing, Science Museum.

Licensed and Granted Patents
Electrical Circuit, PCT/GB97/01572- Dec 1997, Harrison, D., Ramsey, B., Evans, P. (Three option agreements taken out on this patent for approx. £25,000. Patent assigned, Dec. 2000 for £175, 000)
Granted US Patent, Electrical Circuit, US 6,356,234 B1, March 12th 2002 (Patent assigned March 2007 for 50,000 euros)
Lithographically printed seeding layer, PCT/GB99/04064 - Dec 1999, Ramsey, B, Lochun ,D., Harrison, D., (Patent assigned, March 2000, for £50,000). (Granted Chinese Patent, 2006).
Metal Oxide Ink, Evans,P., Harrison,D., (Patent Assigned June 2004 for £60,000)

Professor David Harrison
		Contact details:
		david.harrison@brunel.ac.uk
		+44 (0) 1895 274000
		Brunel University
		School of Engineering and Design
		Cleaner Electronics Research Group
		Uxbridge
		UB8 3PH
		United Kingdom

Professor David Harrison has research interests in sustainable design and printed electronics. Over the past decade he has lead a number of research projects inspired by the goals of environmentally sensitive design. These projects include the application of offset lithographic printing to the manufacture of electronics. New manufacturing processes arising from this project have been successfully patented and licensed. He has also worked on the development of the concept of "Active Disassembly", where by features are designed into products to permit them to disassemble at end of product life, facilitating recycling. He is a Director of a spin out company, Active Fasteners, set up to commercialise this work. Other recent projects supervised include work on ecological footprinting of products, eco innovation, and tools to calculate ecologically optimum product lifetimes.